The UltraMaster is a very powerful Ultra High Shear mixer with a shear rate up to 120.000S-1.
The mixer works according to the rotor-stator principle, where a special closed mixing wheel passes the product through the patented stator. For some applications the UltraMaster can replace a low-pressure homogenizer. The UltraMaster has a homogenising effect is equivalent to 50-80 Bar.
The UltraMaster can create homogenization down to 1 my lump free.
The mixer unit is very versatile and can be used in many setups and applications. For low to medium viscosity the mixer preforms the out-pumping
action itself. For high-viscose applications (>500cp) the setup requires positive feeding.
The UltraMaster has been optimised for mixing of a wide range of products, e.g.:
- Batch operation – the mixer is placed in a circulation loop over a process vessel
- Inline setup – the mixer is placed between to process vessels and operates in single pass.
- For some applications the mixer ads a light homogenisation
- Mixer unit (WEG) (230/400V 50Hz) with shaft sealing (to be frequency controlled)
- Tri-clamp inlet/outlet
- Motor Cover
- Frame with 4 feeds
Download product sheet:
- Double mechanical shaft seal with Bürkert (1/8”) solenoid valve and throttle valve
- Manual regulating seat valve to adjust outlet flow (unique SSV Ø51)
- Bypass loop for extra circulation over mixer
- Fitting SMS DIN/ISO. Other on request
- Other motors, Nema exx., etc. on request
- Start/stop Box with soft starter
- Start/stop Box with inverter
|Model:||Motor||Flow||Shear Rate||Inlet Pressure|
|UltraMaster 32 - 250 - 18.5||18,5 kW||10-40 (5 Bar) m3/h||Up to 120,000 S-1||0.5 - 5 Bar|
|UltraMaster 32 - 250 - 22||22 kW||10-50 (5 Bar) m3/h||Up to 120,000 S-1||0.5 - 5 Bar|